Product Introduction:Concentrating Table (Shaking Table) is a shaker device that uses the asymmetric reciprocating motion of the bed surface to realize the sorting of light and heavy minerals. It belongs to gravity beneficiation.
Application:6-S bed equipment can be used for roughing, selection, sweeping and other different operations, sorting coarse sand (2-0.5mm), fine sand (0.5-0.074mm), slime (-0.074) Different grades of materials. Widely used in the selection of tin, tungsten, gold, bism
Leave Message to get Quotation
The lateral slope adjustment range is large (0~10°), the stroke is easy to adjust; the bed surface is flat, the corrosion resistance is good, the sturdy and durable, and it is not easy to be deformed; when changing the lateral slope and stroke, the shaker bed surface can be kept running smoothly;
The ore group is fed from the feeding tank at the corner of the 6-S shaker bed. At the same time, the horizontal flushing water is supplied from the water supply tank, so the gravity of the ore particles in the gravity, the lateral flow, and the inertia generated by the reciprocating asymmetric movement of the bed surface. Under the action of friction, it is layered by specific gravity and particle size, and moves longitudinally along the bed surface and laterally along the inclined bed surface. The ore particles with different specific gravity and particle size gradually fan down along their respective movement directions, respectively, which are discharged from the different areas of the shaker concentrate end and the tailings side, and finally divided into concentrate, medium ore and tailings.
|6-S Shaking Table|
|Name||Unit||Coarse sand shaker||Fine sand shaker||Slime shaker|
|Drive end width||mm||1855||1855||1855|
|Concentrate end width||mm||1546||1546||1546|
|Maximum feed size||mm||2||0.5||0.15|
|Countertop cleaning water volume||T/d||80-150||30-60||10-17|
|Table top angle||degree||32-42||40||42|
|Mineral processing area||7.6||7.6||7.6|
|Table length ratio||2.6||2.6||2.6|